** LW9030FR 美国杜邦增强级阻燃级​厂家/批发/供应商

东莞市帝邦塑料有限公司
首　页 厂家批发品/服务信息 厂家商户/个人介绍 联系方式
企业/个人名片

主营产品：

PA塑料原料,POM塑料原料,PC塑料原料,PC/ABS塑料原料

东莞市帝邦塑料有限公司

经营模式：贸易/批发/代理

收藏本公司

供应信息搜索
供应信息分类
** LW9030FR 美国杜邦增强级阻燃级​
** LW9030FR 美国杜邦增强级阻燃级​
  • 所属行业：PBT
  • 产品描述：
    ** LW9030FR 美国杜邦增强级阻燃级​
详细描述

    • ** LW9030FR 美国杜邦增强级阻燃级

    • 用途级别：通用级 汽车部件 薄壁部件  

  • undefi**

     
    Physical
    Nominal Value
    Unit
    Test Method
    Density
    1.57
    g/cm³
    		ISO 1183
    Molding Shrinkage
    		    ISO 294-4
    Across Flow
    0.80
    %
    		 
    Flow
    0.30
    %
    		 
    Water Absorption
    		    ISO 62
    Saturation, 23°C, 2.00 mm
    0.72
    %
    		 
    Equilibrium, 23°C, 2.00 mm, 50% RH
    0.21
    %
    		 
    Mechanical
    Nominal Value
    Unit
    Test Method
    Tensile Modulus
    10500
    MPa
    		ISO 527-2
    Tensile Stress (Break)
    125
    MPa
    		ISO 527-2
    Tensile Strain (Break)
    1.8
    %
    		ISO 527-2
    Tensile Creep Modulus
    		    ISO 899-1
    1 hr
    9500
    MPa
    		 
    1000 hr
    7400
    MPa
    		 
    Flexural Stress
    175
    MPa
    		ISO 178
    Impact
    Nominal Value
    Unit
    Test Method
    Charpy Notched Impact Strength
    		    ISO 179/1eA
    -30°C
    8.0
    kJ/m²
    		 
    23°C
    8.0
    kJ/m²
    		 
    Charpy Unnotched Impact Strength
    		    ISO 179/1eU
    -30°C
    40
    kJ/m²
    		 
    23°C
    40
    kJ/m²
    		 
    Notched Izod Impact Strength
    		    ISO 180/1A
    -30°C
    7.0
    kJ/m²
    		 
    23°C
    7.0
    kJ/m²
    		 
    Unnotched Izod Impact Strength
    		    ISO 180/1U
    -30°C
    35
    kJ/m²
    		 
    23°C
    35
    kJ/m²
    		 
    Thermal
    Nominal Value
    Unit
    Test Method
    Heat Deflection Temperature
    		     
    0.45 MPa, Unannealed
    220
    °C
    		ISO 75-2/B
    1.8 MPa, Unannealed
    190
    °C
    		ISO 75-2/A
    Vi** Softening Temperature
    150
    °C
    		ISO 306/B50
    Melting Temperature 3
    225
    °C
    		ISO 11357-3
    CLTE
    		    ISO 11359-2
    Flow
    2.5E-5
    cm/cm/°C
    		 
    Transverse
    8.0E-5
    cm/cm/°C
    		 
    Electrical
    Nominal Value
    Unit
    Test Method
    Surface Resistivity
    1.0E+14
    ohms
    		IEC 60093
    Volume Resistivity
    > 1.0E+15
    ohms·cm
    		IEC 60093
    Electric Strength
    		    IEC 60243-1
    --
    28
    kV/mm
    		 
    1.00 mm 4
    28
    kV/mm
    		 
    2.00 mm 5
    20
    kV/mm
    		 
    Relative Permittivity
    		    IEC 60250
    100 Hz
    3.80
     
    		 
    1 MHz
    3.60
     
    		 
    Dissipation Factor
    		    IEC 60250
    100 Hz
    3.0E-3
     
    		 
    1 MHz
    0.015
     
    		 
    **parative Tracking Index
    400
    V
    		IEC 60112
    Flammability
    Nominal Value
    Unit
    Test Method
    Flame Rating
    		     
    1.50 mm
    V-0
     
    		UL 94, IEC 60695-11-10, -20
    3.00 mm
    5VA
     
    		UL 94, IEC 60695-11-10, -20
    0.750 mm
    V-0
     
    		IEC 60695-11-10, -20
    Oxygen Index
    27
    %
    		ISO 4589-2
    Burning Rate 6 (1.00 mm)
    DNI
     
    		ISO 3795
    Fill Analysis
    Nominal Value
    Unit
     
    Melt Density
    1.42
    g/cm³
    		 
    Specific Heat Capacity of Melt
    1850
    J/kg/°C
    		 
    Thermal Conductivity of Melt
    0.26
    W/m/K
    		 
    **
    Nominal Value
    Unit
     
    Drying Temperature
    120
    °C
    		 
    Drying Time
    2.0 to 4.0
    hr
    		 
    Suggested Max Moisture
    0.040
    %
    		 
    Processing (Melt) Temp
    240 to 260
    °C
    		 
    Melt Temperature, Optimum
    250
    °C
    		 
    Mold Temperature
    30.0 to 130
    °C
    		 
    Mold Temperature, Optimum
    80
    °C
    		 
    Holding Pressure
    60.0
    MPa
    		 
    Back Pressure
    As low as possible
     
    		 
    Drying Re**mended
    yes
     
    		 
    Ejection Temperature
    170
    °C
    		 
    Hold Pressure Time
    3.00
    s/mm